Pink Snowman - UVDTF Wrap for cups/hard surfaces sticker

🌻 Pink Snowman - UVDTF Wrap for Cups/Hard Surfaces Sticker 🌻

Product Overview:

• Design: Pink Snowman
• Type: UVDTF Wrap
• Usage: For cups/hard surfaces
• Size: Approximately 4" x 9"

Application Instructions:

1. Surface Preparation: Ensure the surface is clean. Remove any dirt, oil, etc., and allow it to air dry completely.
2. Decal Removal: Gently peel the backing paper/film off the decal, being careful not to touch the adhesive side.
3. Positioning: Carefully position the sticker on the surface. Avoid lifting and repositioning to prevent cracking.
4. Smoothing: Use fingers or a squeegee to smooth out any bubbles or wrinkles. Apply slowly from the center to the edges.
5. Final Touches: Once applied, use fingers or a squeegee to ensure a great bond. Peel the clear transfer sheet slowly. If the decal lifts, push it back down and apply more pressure.
6. Curing: Let the finished item sit for 24 hours to allow the adhesive to cure.

Important Notes:

• Dishwasher Safe: These UVDTF wraps are NOT dishwasher safe. Do not soak or scrub.
• Care Instructions: Hand-wash with warm water and soap only.
• Responsibility: We are not responsible for stickers damaged during the application process. No refunds, returns, or exchanges will be accepted.

What You Will Receive:

• 1 UVDTF wrap

Size:

• Approximately 4" x 9"

Follow these instructions for a smooth application and lasting results.